1. İsmail Durgun Seda Çimdiken “The Effect of TRIZ Approach in Innovation Progress” ÜAS 2016 – Production Research Symposium, October 2016, İstanbul / Turkey
  2. İlyas Kaçar, İsmail Durgun Fahrettin Öztürk “The Effects of Vehicle Weight Reduction on Transportation CO2 Emission” OTEKON 2016 – 8th Automotive Technologies Congress, pp.748-753, May 2016, Bursa / Turkey
  3. İsmail Durgun Davut Başaran “Preparation Sand Mould of Casting Parts with 3D Printing” OTEKON 2016 – 8th Automotive Technologies Congress, pp.1242-1248, May 2016, Bursa / Turkey
  4. İsmail Durgun, Ülfet Öztürk, Hüseyin Karataş “Low Cost Automation Application for World Class Manufacturing” ÜAS 2016 – Production Research Symposium, October 2016, İstanbul / Turkey
  5. İsmail Durgun “Management of Modification in Prototype Development Process” UAS 2016 – Production Research Symposium, October 2016, İstanbul / Turkey
  6. İsmail Durgun, Özgür Öztürk, Ülfet Öztürk “TRIZ Solutions for The Vehicle Sliding Doors Opening Problem on Cold Weather Conditions” ÜAS 2016 – Production Research Symposium, October 2016, İstanbul / Turkey
  7. Önder Tokçalar, Resul İlhan, Ömer Şimşek, İsmail Durgun “Human-Robot Interaction in Hybrid Assembly Systems Using Medium Payload Robots” ToRK 2016 – National Robotic Conference, November 2016, İstanbul / Turkey
  8. İsmail Durgun, Tuna Özçer, Erdem Tomuş, Emre Doruk, Kemal Ekbiç “Development of Partner Searching Portal in University Industry Cooperation: TOFAŞ Example” ÜAS 2015 – Production Research Symposium, pp.989-996, October 2015, İzmir / Turkey
  9. İsmail Durgun “Evolution of Employee Research Ideas Inside the Company – Case of TOFAŞ” ÜAS 2015 – Production Research Symposium, pp.591-595, October 2015, İzmir / Turkey
  10. Emre Yiğitoğlu, Tanya A. Başer, Mesut Kaya, Metin Çallı, Adem Karşı, Emre Doruk, İsmail Durgun “The Effect of Brake Hardening on Mechanical Properties in Al-Mg-Si Alloys” ALUS 2015 – 7th Aluminium Symposium, pp.659-664, October 2015, İstanbul / Turkey
  11. Hasan Ayartürk, Arda Odabaşıoğlu, İsmail Durgun “Axial Fan Unused Engine Cooling System” MTS – 8thEngineering and Technology Symposium – Çankaya University, pp.13-17, May 2015, Ankara / Turkey
  12. Emre Doruk, Tanya Aycan Başer, İsmail Durgun “Investigation of Energy Absorption Capacity of Aluminium Alloys Used in Vehicle Parts” ALUS 2015 – 7th Aluminium Symposium, pp.34-39, October 2015, İstanbul / Turkey
  13. İsmail Durgun “Prototype Production in Automotive Development Process Past Present and Future” ÜAS 2015 – Production Research Symposium, pp.597-602, October 2015, İzmir / Turkey
  14. İsmail Durgun “Colour Optimization in Automotive Manufacturing” ÜAS 2015 – Production Research Symposium, pp.453-458, October 2015, İzmir / Turkey
  15. İsmail Durgun, Emre İsa Albak, Emre Ünsal, M. İhsan Karamangil, Gökhan Sevilgen, Abdil Kuş, Erol Solmaz, Ferruh Öztürk “Production of Composite Intake Manifold for Formula SAE Car” KOMPEGE – III. Ege Composite Materials Symposium, pp.214-221, November 2015, Kuşadası-İzmir / Turkey
  16. İsmail Durgun “Carbon Fiber Car Body Production by Vacuum Bagging Methods” KOMPEGE – III. Ege Composite Materials Symposium, pp.620-627, November 2015, Kuşadası-İzmir / Turkey
  17. İsmail Durgun “Comparison of Layer Rapid Prototyping Methods” XIII. Automotive and Supplier Symposium, pp.24-32, November 2015, İstanbul / Turkey
  18. İsmail Durgun, Emre Doruk “Development of Automatic Hand Type Control Device for Spot Welding” IX. Welding Technology National Congress and Exhibition, pp.107-115, November 2015, Ankara / Turkey
  19. Emre Doruk, Murat Pakdil, Gürel Çam, İsmail Durgun, Utku Can Kumru “Resistance Spot Welding TOFAŞ Applications in Automotive Industry” IX. Welding Technology National Congress and Exhibition, pp.29-37, November 2015, Ankara / Turkey
  20. İsmail Durgun, Onur Vatansever, Rukiye Ertan, Nurettin Yavuz “The Effect of The Manufacturing Methods on Mechanical Properties in Polymer Based Carbon Fiber Reinforced Composite Materials” OTEKON 2014 – 7th Automotive Technologies Congress, May 2014, Bursa / Turkey
  21. Emre Doruk, İsmail Durgun “Passive Safety System Which Reduces Pedestrian Head” TRANSİST – 7thInternational Transport Technology Symposium, pp.17-22, December 2014, İstanbul / Turkey
  22. Emre Doruk, İsmail Durgun “Forming Process Effects on Frontal Crash Performance” TRANSİST – 7thInternational Transport Technology Symposium, pp.35-42, December 2014, İstanbul / Turkey
  23. Emre Doruk, İsmail Durgun “Investigation of Different Trigger Geometry Effects on Crash Performance of Crash Box” TRANSİST – 7th International Transport Technology Symposium, pp.43-49, December 2014, İstanbul / Turkey
  24. Emre Doruk, İsmail Durgun “Hydraulic Platform Design for Garage Purpose” TRANSİST – 7th International Transport Technology Symposium, pp.50-58, December 2014, İstanbul / Turkey
  25. İsmail Durgun “Composite Parts Production with Hand Lay Method” MTS – 7th Engineering and Technology Symposium, pp.283-287, May 2014, Ankara / Turkey
  26. İsmail Durgun “Production of Carbon with Vacuum Infusion Method” OTEKON – 7th Automotive Ethnologies Congress, May 2014, Bursa / Turkey
  27. Hakan Aydın, İsmail Durgun, Mümin Tutar, Ali Bayram “Correlations Between Welding Time and Mechanical Properties of Spot-Welded Dissimilar Joints for High Strength Steels” OTEKON – 7th Automotive Technologies Congress, May 2014, Bursa / Turkey
  28. Muhammed Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun “A Comparative Analysis of The Finite Element Solutions for Open and Closed Step in Numerical Analysis of Incremental Sheet Forming” TUMTMK – 18. National Congress of Mechanics, pp.589-598, August 2013, Manisa / Turkey
  29. İsmail Durgun “Same Manufacturers for Prototype and Series Sheet Metal Parts Production to Effects of Product Development Process” ÜAS 2013 – Production Research Symposium, September 2013, pp.34-39, Sakarya / Turkey 
  30. İsmail Durgun “The Production of Carbon Fiber Parts with Vacuum Bagging” KOMPEGE – II. National Aegean Composite Materials, November 2013, İzmir / Turkey
  31. İsmail Durgun “Production of Composite Parts with Hand Lay-Up Method in The Process of Automotive Development” KOMPEGE – II. National Aegean Composite Materials, November 2013, İzmir / Turkey
  32. İsmail Durgun “Production of Carbon Fiber Hood Engine with Vacuum Infusion Method” KOMPEGE – II. National Aegean Composite Materials, November 2013, İzmir / Turkey
  33. İsmail Durgun, Onur Vatansever, Rukiye Ertan, Nurettin Yavuz “Experimental Comparison of Composite Part Manufacturing Processes Used in Automotive Industry” KOMPEGE – II. National Aegean Composite Materials, November 2013, İzmir / Turkey
  34. Ali Sakin, İsmail Durgun, “Plastic Parts Production with Incremental Forming Technology” MATİT – Machinery Manufacturing Technology Congress, December 2013, pp. 120-127, Bursa / Turkey
  35. Muhammed Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun “Prototype Sheet Metal Parts Production with Incremental Forming Technology” MATİT 2013 – Machinery Manufacturing Technology Congress, pp.179-188, December 2013, Bursa / Turkey
  36. İsmail Durgun, Haluk Dinkçi “Poliureol Die Manufacturing for Sheet Metal Part Production” MATİT 2013 – Machinery Manufacturing Technology Congress, pp.174-178, December 2013, Bursa / Turkey
  37. Besim Baranoğlu, Omer Music, Muhammed Emin Tamer, Ali Sakin, İsmail Durgun “Validation of A Finite Element Based System for Use in Prototype Manufacturing of Prototype Parts” OTEKON 2012 – 6thAutomotive Technologies Congress, June 2012, Bursa / Turkey
  38. Besim Baranoğlu, Omer Music, Muhammed Emin Tamer, Ali Sakin, İsmail Durgun “The Use of Incremental Sheet Metal Forming Process in Prototype Manufacturing:Simulation, Manufacturing and Comparison” UAS 2012- 12th Production Research Symposium, September 2012, İzmir / Turkey
  39. Haluk Dinkçi, İsmail Durgun “Use Recycled Dies Material for Prototype Sheet Metal Part Production”, 12thAutomotive and Manufacturing Technology Symposium, pp.338-345, May 2011, Bursa / Turkey
  40. Ali Sakin, İsmail Durgun “Examination of Incremental Forming Process in The Production of Sheet Metal Parts” 12th Automotive and Manufacturing Technology Symposium, pp.105-113, May 2011, Bursa / Turkey
  41. Ali Sakin, İsmail Durgun “Applications of Incremental Sheet Forming Process” 12th Automotive and Manufacturing Technology Symposium, pp.346-353, May 2011, Bursa / Turkey
  42. Ö. Umut Çalışkan, İsmail Durgun “Silicon Moulding Production Technology Applications in Automotive Product Development Process” 12th Automotive and Manufacturing Technology Symposium, pp.206-217, May 2011, Bursa / Turkey
  43. İsmail Durgun, “Direct Digital Manufacturing in Automotive” 12th Automotive and Manufacturing Technology Symposium, pp.327-337, May 2011, Bursa / Turkey
  44. İbrahim Utanır, İsmail Durgun, Özgür Öztürk “Automation Technics in Design” 12th Automotive and Manufacturing Technology Symposium, pp.354-363, May 2011, Bursa / Turkey
  45. İsmail Durgun, Davut Başaran “FDM Layer Manufacturing Technology Applications in Vehicle Development Process” OTEKON 2010 – 5th Automotive Technologies Congress, pp.89-95, Uludağ University, 2010, Bursa / Turkey
  46. İsmail Durgun, Mehmet Kırbıyık, Recep Yamankaradeniz “Available Energy Analysis of Automotive Body Cataphoresis Coating Process” IV. Engineering and Architecture Symposium, 11-13 September 2002, Balıkesir University, Balıkesir / Turkey
  47. İsmail Durgun, Mehmet Kırbıyık, Recep Yamankaradeniz “Energy and Available Energy Analysis and Optimization in Automotive Body Phosphate Coating Process” 6th National Refrigeration and Air Conditioning Technology Congress, 13-14 April 2000, Çukurova University, pp.247-254, Adana / Turkey
  48. İsmail Durgun, Taner Derbentle “Transient Heat Flow Through Walls” 1993, Thermal Science and Technology Congress, Fırat University, pp.34-43, Elazığ / Turkey