1. Ümit Yalçın, İsmail Durgun, Abdil Kuş , Necmettin Kaya “Die Design and Prototype Production of Multi-Point Sheet Metal Forming” OTEKON 2018 – 9th International Automotive Technologies Congress, pp.1781-1788, May 2018, Bursa / Turkey
  2. İsmail Durgun “Bismuth Tin Material of Die Used in Sheet Metal Parts Production” International Engineering Research Symposium – UMAS 2017, Düzce University, Turkey
  3. İsmail Durgun “Direct Digital Manufacturing in Automotive Product Development” International Engineering Research Symposium – UMAS 2017, Düzce University, Turkey
  4. Ergün Ekici, Abdil Kuş, İsmail Durgun “Evaluation of Delamination Formation In Drilling of Sandwich Composites Using Taguchi Method and Grey Relational Analysis”, UMTIK-17th International Conference on Machine Design and Production, July 2016, Bursa, Turkey
  5. İsmail Durgun, Seda Çimdiken “The Effect of TRIZ Approach in Innovation Progress” ÜAS 2016 – 16thProduction Research Symposium with International Participation, pp.429-435, October 2016, İstanbul / Turkey
  6. İsmail Durgun, Seda Çimdiken “Patent Process Management in Companies” ISITES 2016 – International Symposium on Innovation Technologies in Engineering and Science, November 2016, pp.1083-1091, Antalya / Turkey
  7. Seda Çimdiken, Erhan Küçüksüleymanoğlu, İsmail Durgun “Inventive Thinking and Practices for Automotive Industry” University of Cambridge R&D Management Conference June 2016 Cambridge, UK
  8. İsmail Durgun, Ülfet Öztürk, Hüseyin Karataş̧ “Low Cost Automation Application for World Class Manufacturing” ÜAS 2016 – 16th Production Research Symposium with International Participation, pp.436-441, October 2016, İstanbul / Turkey
  9. İsmail Durgun “Management of Changes in The Prototype Development Process” ÜAS 2016 – 16th Production Research Symposium with International Participation, pp.425-428, October 2016, İstanbul / Turkey
  10. İsmail Durgun, Davut Başaran, Utku Demirkan “Development of Car Rear Lighting Group with 3D Printing Methods” UMTIK-17th International Conference on Machine Design and Production, July 2016, Bursa, Turkey
  11. İsmail Durgun, Özgür Öztürk, Ülfet Öztürk “TRIZ Solutions for The Vehicle Sliding Doors Opening Problem on Cold Weather Conditions” ÜAS 2016 – 16th Production Research Symposium with International Participation, pp.442-447, October 2016, İstanbul / Turkey
  12. Hosein Khalatbari, İsmail Lazoğlu, İsmail Durgun “Implicit Finite Element Simulation of Incremental Sheet Forming Process” UMTIK – 17th International Conference on Machine Design and Production, July 2016, Bursa, Turkey
  13. Hakan Kalkan, Yiğit Uğurlu, S.Serpil Erdönmez, Besim Baranoğlu, Vildan Çorumlu, Bihter Bilgin, Canberk Mermer, İsmail Durgun “Sheet Laminated Dies: An Alternative To Fast Prototyping in Forming of Sheet Metal Parts” UMTIK-17th International Conference on Machine Design and Production, July 2016, Bursa, Turkey
  14. Hasan Ayartürk, Emre Doruk, İsmail Durgun, Kemal Ekbiç “New Heating System Development Working with Waste Heat for Electric Vehicles” TRA-6th Transport Research Arena, April 2016, Warsaw / Poland
  15. Gürkan Yılmazoğlu, Emre Doruk, Zeki Ayaz, Tanya Başer, İsmail Durgun “The Effect f Heat Treatment Parameters on The Mechanical Properties and Crashworthiness of AA6082 Extruded Profiles” 8thInternational Conference and Exhibition on Design and Production of Machines and Dies/Mold, pp.257-260, June 2015, Kuşadası-Aydın / Turkey
  16. Durgun İsmail, Albak Emre İsa, Ünsal Emre, Sevilgen Gökhan, Karamangil Mehmet İhsan, Kuş Abdil, Solmaz Erol, Öztürk Ferruh (2015) “Production of Composite Intake Manifold for Formula SAE Car” KOMPEGE III – III. Aegean Composite Materials Symposium with International Participation, pp.214-221, November 2013, İzmir / Turkey
  17. Mehmet Emin Tamer, Kemal Davut, Omer Music, İsmail Durgun “Using Magnetic Barkhausen Noise Technique for The Prediction of Properties of Components Manufactured by Incremental Sheet Forming” ICBM-11th International Conference on Barkhausen Noise and Micromagnetic Testing, June 2015, Kuşadası
  1. İsmail Durgun “Carbon Fiber Car Body Production by Vacuum Bagging Methods” KOMPEGE III – III. Aegean Composite Materials Symposium with International Participation, pp.620-627, November 2013, İzmir / Turkey
  2. İsmail Durgun, Hasan Ayartürk, Harun Yeni “Sliding Roof Mechanism for Light Commercial Vehicles” 23rdInternational Symposium of Automotive Engineering, Agust 2015, Sao Paula, Brazil
  3. Hasan Ayartürk, Arda Odabaşıoğlu, Emre Doruk, İsmail Durgun “Innovative Motor Cooler System Development Using Air Amplifier” TRANSİST 2015 – 8th International Transportation Technologies Symposium, pp.11-20, December 2015, İstanbul / Turkey
  4. İsmail Durgun, Arda Odabaşıoğlu, Hasan Ayartürk “Engine Cooling System Without Radiator” 23rdInternational Symposium of Automotive Engineering, August 2015, Sao Paula, Brazil
  5. Emre Doruk, İsmail Durgun “Forming Process Effects on Frontal Crash Performance of Vehicles” TRANSİST 2014 – 7th International Transportation Technologies Symposium, pp.35-42, December 2014, İstanbul / Turkey
  6. Emre Doruk, İsmail Durgun “Passive Safety System Which Reduces Pedestrian Head Injury” TRANSİST 2014 – 7th International Transportation Technologies Symposium, pp.17- 22, December 2014, İstanbul / Turkey
  7. Emre Doruk, İsmail Durgun “Investigation of Different Trigger Geometry Effects on Crash Performance of Crash Box” TRANSİST 2014 – 7th International Transportation Technologies Symposium, pp.43-49, December 2014, İstanbul / Turkey
  8. Mehmet Emin Tamer, Omer Music, Besim Baranoğlu, İzzet Özdemir, İsmail Durgun, Ali Sakin “Numerical and Experimental Investigation of Incremental Sheet Forming” METFORM 2014 – 2nd International Metal Forming Conference, September 2014, Ankara / Turkey
  9. Muhammed Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun “Finite Element Analysis 0f Incremental Sheet Metal Forming with Successive Tool Paths for Use in Prototype Manufacturing of Car Body Components” WCCM XI – 11th World Congress on Computational Mechanics, July 2014, Barcelona / Spain
  10. Barış Özgen, İsmail Lazoğlu, İsmail Durgun “Experimental Investigation of The Process Parameters on The Forming Force for Single Point Incremental Forming” UMTIK 2014 – 16th International Conference on Machine Design and Production, pp.860-873, June 2014, İzmir / Turkey
  11. Emre Doruk, İsmail Durgun “Hydraulic Platform Design for Garage Purpose” TRANSİST 2014 – 7thInternational Transportation Technologies Symposium, pp.50-58, December 2014, İstanbul / Turkey
  1. Abdil Kuş, Ertu Ünver, Brain Jagger, İsmail Durgun “A Study of Injection Moulding with Bismuth Alloy” SIM-Sustainable Intelligent Manufacturing International Conference, June 2013, pp.225-231, Portugal
  2. Mehmet Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun “Simulation for Incremental Sheet Metal Forming Process: A Comparison of Implicit & Explicit Finite Element Analysis with Experimental Data” 7th International Conference and Exhibition on Design and Production of Machines and Dies / Molds, pp.29-36, June 2013, Antalya / Turkey
  1. İsmail Durgun, Erkan Aybaraz, Ali Sakin, Serkan Ali Altınel, Erkan Polat “Polymer Tooling for Low Volume Production: A Case Study of Automotive Industry” 7th International Conference and Exhibition on Design and Production of Machines and Dies / Moulds, pp.243-247, June 2013, Antalya / Turkey
  2. İsmail Durgun, Erkan Aybaraz, Ali Sakin, Serkan Ali Altınel, Erkan Polat “Prototype Tooling of Sheet Metal Components of Car Body” 7th International Conference and Exhibition on Design and Production of Machines and Dies / Moulds, pp.249-254, June 2013, Antalya / Turkey
  3. İsmail Durgun, Mahide Sondikme “Project Summer Internship Application in Engineering Education: TOFAŞ Case” 2nd International Engineering Education Conference, November 2012, Antalya / Turkey
  4. İsmail Durgun, Mahide Sondikme “Example of TOFAŞ Academy About Learning All Employees and Suppliers Work for Industry” 2nd International Engineering Education Conference, November 2012, Antalya / Turkey
  1. İsmail Durgun, Ali Rıza Yıldız “Structural Design Optimization of Vehicle Components Using Differential Evolution” UMTIK-15th International Conference on Machine Design and Production, June 2012, Denizli / Turkey
  2. Besim Baranoğlu, Muhammed Emin Tamer, Ali Sakin, İsmail Durgun, Omer Music, Hasan U. Akay “Industry Funded Undergraduate Research Projects As A New Method for Industry-University Cooperation: The Example of TOFAŞ-Atılım University Joint Project on Incremental Forming” International Engineering Education Conference, November 2012, Antalya / Turkey
  3. Fatih Fuat İnce, Halit Süleyman Türkmen, Zahit Mecitoğlu, Niyazi Uludağ, İsmail Durgun, Evren Altınok, Hasan Örenel “A Numerical and Experimental Study on The Impact Behaviour of Box Structures” ICM-11thInternational Conference on the Mechanical Behaviour of Materials, France, 2011